|Welcome to the home of
Building "Little Joe" or "Calico Hunter" from my plans requires previous knowledge of "Stitch and tape" type construction as the seams are held together with fiberglass tape filled with Epoxy. If you are not familiar with this type of construction, contact me and I will direct you to the appropriate materials before you start your project.
|Limited time special! Plans for "Little Joe" and "Calico Hunter" are now available fully detailed on four 17" X 22" blueprints with complete instructions. The picture on the left comes from the blueprints of the light weight version of "Little Joe". "Joe" is made with 2 sheets of plywood and a couple of wide boards for the seats. Little Joe will weigh just about 60 pounds or less and is 7' 9" X 4' 2". Little Joe is not your standard Sabot or Peanut Pram although at first glance it may appear so. I have designed this one more for a small engine than some of the more traditional old "peanut" prams. I have taken out some of the rocker (important for sailing and rowing, not so important for motoring) and made Joe higher, wider, stabler, able to hold heavy loads, and drier when towing too. (if you knew the "real" Joe you would understand...)
For a limited time these plans are available for $25.00
Click here for the secure order form
[ SMALLBOATS HOME ] [ SCOTTY'S BOATS ] [ BOAT KITS ] [ BOAT PLANS ] [CURRENT PROJECTS ]
[ DYNAMITE PAYSON ] [ FREE PLANS BY IRA EINSTEEN ] [ CONTACT SCOTTY ] [ LINKS ] [ ORDER FORM ]
This document maintained by The Backyard Renegade.
Do not copy this stuff for other than personal use. If you would like to use any of the photos, graphics, or text information for any other purpose, please contact me first. I can at times be pretty reasonable...